Enjoy immersive multi-channel sound with the Yamaha AVENTAGE RX-A3080 9.2-Channel Network A/V Receiver. It delivers up to 150W of power per channel at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets, while Yamaha's Compressed Music Enhancer helps to deliver optimized sound quality.
Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE RX-A3080 to access music from your connected computer or NAS. Amazon Alexa compatibility enables you to control certain functions of the receiver with just your voice through your Alexa-enabled devices. With seven HDMI inputs and three outputs, this receiver can act as a video switcher for your HD source components. It will pass through HDR UHD 4K signals and will upscale non-UHD signals to near-4K quality for enhanced viewing of lower-resolution sources when paired with a UHD display. The receiver also has a USB port for accessing media stored on USB flash drives. YPAO-RSC multipoint sound optimization will calibrate the receiver to your speakers and room setup for a tailored listening experience.
Note: Access to certain Internet-based content may require a subscription to a service.
Total Purity Concept
The Total Purity Concept is designed to encompass high-drive amp technology, high-purity preamplification, anti-vibration technology, and independent, pure power supplies. The receiver has fully discrete power amplifiers that help minimize distortion and adopts pure independent power supplies, allowing dedicated power supplies for the analog and digital circuitry to prevent digital noise from affecting analog circuitry. The anti-vibration heat sinks are designed to suppress vibration from transistors and sound pressure.
Yamaha AVENTAGE RX-A3080 9.2-Channel Network A/V Receiver
Specs
Yamaha RX-A3080 Specs
Main Unit Output Power 150 W per channel @ 8 Ohms, 20 Hz to 20 kHz, 0.06% THD, 2 channels driven
165 W per channel @ 8 Ohms, 1 kHz, 0.9% THD, 2 channels driven
230 W per channel @ 8 Ohms, 1 kHz, 10% THD, 1 channel driven (JEITA)Dynamic Power per Channel 175 W @ 8 Ohms (front L/R)
220 W @ 6 Ohms (front L/R)
295 W @ 4 Ohms (front L/R)
410 W @ 2 Ohms (front L/R)Channels 9.2 Object-Based Audio Support Dolby Atmos, DTS:X Audio Decoding Dolby TrueHD, Dolby Digital Plus, Dolby Surround, DTS-HD Master Audio Video Pass-Through 4K/60p (4:4:4), HDR10, Dolby Vision, HLG, BT.2020 HDCP Version HDCP 2.2 on all ports Connectivity Bluetooth Yes (SBC / AAC) Wi-Fi Yes, dual-band (2.4 / 5 GHz) AirPlay Yes Tuner AM / FM Inputs 7 x HDMI
3 x optical TOSLINK
3 x digital coaxial
2 x RCA component video
4 x RCA composite video
1 x gold-plated stereo XLR
8 x stereo RCA audio (1 front)
1 x stereo RCA audio (phono, with ground screw)Outputs 3 x HDMI
2 x subwoofer pre-out
1 x Zone 2/Front Presence stereo RCA pre-out
1 x Zone 3/Rear Presence stereo RCA pre-out
1 x 7-channel RCA pre-out
1 x gold-plated stereo XLR Front pre-out
1 x 1/4" / 6.35 mm headphone (front)Other Connectors 1 x FM tuner antenna
1 x AM tuner antenna
1 x USB (front)
2 x wireless antennas
1 x Ethernet LAN
1 x 1/8" / 3.5 mm calibration mic (front)
2 x 1/8" / 3.5 mm 12 V trigger out
1 x 1/8" / 3.5 mm remote in
1 x 1/8" / 3.5 mm remote out
1 x 9-pin RS-232CSpeaker Connectors 11 x binding post pairs HDMI CEC Yes Audio Return Channel (ARC) Yes USB Formats MP3, WMA, WAV, MPEG-4 AAC (up to 48 kHz / 16-bit), ALAC (up to 96 kHz / 24-bit), FLAC (up to 384 kHz / 24-bit), AIFF (up to 384 kHz / 32-bit), DSD (up to 11.2 MHz) General Power Requirements Not specified by manufacturer Standby Power Consumption IR Only: ≤0.1 W Dimensions (W x H x D) Without Antenna: 17.125 x 7.5 x 18.625" / 43.5 x 19.05 x 47.31 cm
With Antenna: 17.125 x 10.625 x 18.625" / 43.5 x 26.99 x 47.31 cmWeight 39.9 lb / 18.1 kg Packaging Info Package Weight 44.8 lb Box Dimensions (LxWxH) 21.8 x 21.3 x 11.5"