This Vinten System Vision blue with Flowtech 75 Carbon Fiber Tripod with Rubber Feet supports cameras and accessories weighing from 4.6 to 11 pounds, and is well suited for DSLRs, Mirrorless, and small to medium camcorders. The head features a sliding balance plate to balance your camera, variable counterbalance adjustment and variable tilt drag. The head also features a tilt range of -90 to +90°.
The included Flowtech legs are a lightweight set of tripod legs that can be used with or without a mid-level spreader. Although the legs come with removable rubber boots that can go over the spikes, this bundle does not include a mid-level spreader (available separately). The legs have three locking points, so you do not need a spreader, and they support up to 44 pounds, which means they can easily handle the weight of the fluid head as well as your camera and accessories. They extend from approximately two feet to five feet, and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top of the leg that allows you to open the leg sections to raise or lower the leg. There is room for an optional mid-level spreader, and the legs feature a magnetic locking system strong enough to hold them together during transport, but weak enough to easily release the legs when you want to set them up. The included padded carry bag is for storing or transporting the head and legs.
LF Drag technology using a unique lubricant fluid for fine adjustment of drag level to smooth movements as well as allow for a controlled whip pan at any setting.
Operating temperature range of 5 to 86°F.
Accepts optional blueBridge accessory to lower the range of payloads for the Vision blue system.
Dual-stage, carbon fiber, 75mm bowl tripod
Weighs only 6.4 pounds but supports up to 44 pounds
The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.
The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.
Vinten System Vision blue with Flowtech 75 Carbon Fiber Tripod
Vinten Vision Blue Specs
Load Capacity 4.6-11.0 lb / 2.1-5.0 kg at 2.2" / 55 mm center of gravity
Base 75 mm ball
Tilt Range ±90°
Pan Range 360°
Pan Bar Single fixed length
Drag Control Calibrated infinitely adjustable LF drag system
Counterbalance Infinitely adjustable Perfect Balance
Leveling Bubble Illuminated high contrast blue LED
Operating Temperature 5 to 86°F / -15 to 30°C
Height 4.8" / 12.1 cm
Length 5.1" / 12.9 cm
Width 5.8" / 14.8 cm
Weight 5.3 lb / 2.4 kg with pan bar, camera plate, and bowl clamp
Leg Stages/Sections 2-stage (3-section)
Height Range Without Mid-Level Spreader: 10.24 to 60.24" / 26 to 153 cm
Collapsed Height 26.8" / 68 cm
Load Capacity 44 lb / 20 kg
Head Attachment Fitting 75 mm bowl
Head Attachment Fitting:
Leg Lock Type Lever clamp
Weight 6.4 lb / 2.9 kg
Package Weight 20.0 lb
Box Dimensions (LxWxH) 43.0 x 10.0 x 10.0"