The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 30Mbps.* Beam operates on the unlicensed 5GHz band and can transmit up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.
Multicast Capable + IFB
Beam is multicast capable up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field.
Beam offers a full duplex RS-422 port for remotely controlling your camera.
Beam utilizes the RTSP and MPEG-TS protocols, allowing broadcasters to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.
With a 3G-SDI input and your choice of AB- or V-mount battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and support for high power transmission on the 5.15 ~ 5.25GHz band.
TERADEK BEAM TX HD-SDI VIDEO TRANSMITTER WITH AB MOUNT
BEAM Specification Video Compression H.264 Baseline Profile Level 4.2 with de-interlacing System Latency 90 - 110 millisecond delay between Transmitter and Receiver Wireless range 2500ft +- 200ft Digital Video In/Out SD-SDI, HD-SDI, 3G-SDI Video Port TX: SDI input and looped Output, RX: SDI output Supported Video Resolutions SMPTE244 480i59.94 (NTSC), 480i60 (861-D) IEC61179-5 576i50 (PAL) SMPTE 296M 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60 SMPTE 274M 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60 SDI Compliance SMPTE 259M BI.656 SDTV Digital Signal/Data Serial Digital Interface SMPTE 292M BT.1120 1.5Gb/s Signal/Data Serial Digital Interface SMPTE 425M 3Gb/s Signal/Data Serial Digital Interface SMPTE 299M 16bit Digital Audio Format for SMPTE 292M SMPTE 352M Video Payload Identification for Digital Interfaces Bitrate RTSP Server Up to 30Mbps MPEG2-TS Server Up to 15Mbps Main Digital Audio In/Out TX/RX SDI embedded audio: 48kHz 16-bit stereo linear PCM Main Analog Audio Out RX 48kHz 16-bit stereo linear PCM with mini stereo phone output jack Talk-Back Analog Audio In/Out RX/TX 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack Radio Power Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna Radio standard IEEE 802.11a/n: OFDM Frequencies U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz) Antenna 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW Security 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES WPS Wireless Protected Setup for easy set up and security configuration Ethernet LAN 10/100 BASE-TX, RJ-45 jack Multicast WiFi: Up to 4 Receivers LAN: No limit on number of receivers External Control Full duplex RS422 serial port USB Factory reset, IP configuration or firmware upgrade without PC Power Input/Consumption DC 7V-17V, 12 Watt Dimensions (H x W x D) (mm) 170 x 105 x 28 each board assembly (TX or RX) Weight (g) TX: 990g
Operating Temperature 0 deg C to 50 deg C