Shure QLXD124/85-H50 overview
For capturing audio, the QLXD124/85 Handheld and Lavalier Combo Wireless Mic System by Shure is a good choice. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control and AES-256 encryption.
The QLXD124/85 wireless system is built with switching diversity and automatic channel scan, and has one-touch IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The handheld and bodypack transmitters also have backlit LCD displays to allow for navigation though the menus and controls. With clearly defined performance, the QLXD124/85 delivers good clean audio and provides professional features for demanding live sound events and installations.
The QLXD124/85 system includes a QLXD4 receiver, QLXD1 transmitter, WL185 microphone, QLXD2/SM58 transmitter, PS23 power supply, two detachable 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, two zipper bags, four AA alkaline batteries, and rackmount hardware.
Note: Note: Bodypack and handheld transmitters cannot be used simultaneously.
Includes handheld and bodypack transmitters with SM58 and WL185 microphones
120 dB dynamic range
Digital predictive switching diversity receiver to capture the clearest sound
64 MHz tuning bandwidth
Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band
Easy pairing of transmitters and receivers over IR scan and sync
Automatic channel scan
Selectable display mode showing group/channel, frequency, or battery runtime
Rugged metal construction
Shure QLXD124/85 Handheld and Lavalier Combo Wireless Mic System
SPECS
Shure QLXD124/85-H50 specs
System Specifications RF Carrier Frequency Range H50: 534 to 598 MHz Working Range 328' (100 mm)
Note: Actual range depends on RF signal absorption, reflection and interferenceRF Tuning Step Size: 25 kHz, varies by region Image Rejection Greater than 70 dB, typical RF Sensitivity -97 dBm at 10-5 BER Latency Less than 2.9 ms Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB)
QLXD2: Dependent on microphone typeAudio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1% Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output Operating Temperature Range 0 to 122°F (-18 to 50°C)
Note: Battery characteristics may limit this rangeStorage Temperature Range -20 to 165°F (-29 to 74°C)
Note: Battery characteristics may limit this range.Mic Capsule Type Handheld: SM58
Lavalier: WL185Frequency Response 20 Hz to 20 kHz Polar Pattern Cardioid Bodypack Transmitter Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 rechargeable Li-Ion
AA batteries 1.5 VBattery Runtime At 10mW: Shure SB900, up to 10 hours
Alkaline: up to 9 hoursHousing Cast Aluminum Audio Input Connector 4-pin male mini connector (TA4M) Configuration Unbalanced Impedance 1 MOhms Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: −120 dBV, A-weighted, typical RF Output Connector: SMA Antenna Type 1/4 wave Impedance 50 ohms Occupied Bandwidth <200 kHz Modulation Type Shure proprietary digital Power 1 mW or 10 mW Dimensions (H x W x D) 3.38 x 2.57 x 0.92" (86 x 65 x 23 mm) Weight 4.9 oz (138 g) without batteries Receiver Housing Steel Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive) RF Input Spurious Rejection: Greater than 80 dB, typical
Connector Type: BNC
Impedance: 50 ohmsAudio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps
Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio −)
Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced)
XLR: 100 ohms
Full Scale Output: 1/4" (6.35 mm), +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad
Phantom Power Protection: 1/4" (6.35 mm), Yes
XLR: YesNetworking Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Ethernet Cable Length: 328' (100 m)Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm) Weight 1.71 lb (777 g) Handheld Transmitter Housing Machined aluminum Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime At 10 mW:
Shure SB900: up to 10 hours
Alkaline: up to 9 hoursAudio Input Configuration: Unbalanced RF Output Antenna Type: Integrated Single Band Helical
Occupied Bandwidth: Less than 200 kHz
Modulation Type: Shure proprietary digital
Power: 1 mW or 10 mW
Note: Varies by regionDimensions (L x Diam) 10.1 x 1.5" (256 x 38 mm) Weight 12.2 oz (347 g) Packaging Info Package Weight 10.3 lb Box Dimensions (LxWxH) 19.3 x 17.5 x 4.1"