Shure BLX188/CVL-J10 overview
The BLX188/CVL Dual-Channel Dual Lavalier Wireless Mic System from Shure includes a BLX88 dual-channel wireless receiver, 2 BLX1 bodypack transmitters, 2 CVL Centraverse lavalier microphones, and 4 AA batteries. The system is set to Shure's J10 frequency band and operates between 584 - 608 MHz.
The BXL1 bodypack transmitters have a 300' line of sight operation range with the BLX88 receiver. They are each powered by two included AA batteries that can provide up to 14 hours of operation. The BLX88 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.
CVL Centraverse Lavalier Condenser Microphone
The CVL Centraverse Lavalier Condenser Microphone from Shure is a miniature lavalier condenser microphone that is optimized for speech and vocal performance. A tie clip and windscreen are included.
Designed for low visibility
Permanently charged electret condenser element for vocal reproduction
TA4F (TQG) connector integrates with Shure wireless bodypack systems
Tailored frequency response optimized for public speaking and presentation
UPC: 042406325813 BLX1 Bodypack Transmitter (J10: 584 - 608 MHz)
The BLX1 Bodypack Transmitter from Shure is designed for use with Shure's BLX wireless systems. It is set to the J10 frequency band and operates between 584 and 608 MHz. It has a TQG input and can be used with Shure lavalier, headset, earset and instrument microphones. With the optional WA302 adapter cable, the BLX1 can be used as a transmitter for guitar. The unit has a top panel mounted on/off switch as well as volume control for quick access while speaking or performing. The BLX1 is powered by the two included AA batteries for up to 14 hours.
UPC: 042406246200 BLX88 Dual-Channel Wireless Receiver (J10: 584 - 608 MHz)
The BLX88 Dual-Channel Wireless Receiver from Shure is a dual-channel receiver set to Shure's J10 frequency band and operates between 584 to 608 MHz. It has microprocessor-controlled internal antenna diversity for reduced signal interference and dropouts. The one-touch QuickScan frequency selection feature allows you to quickly locate the frequency with the least amount of interference available.
Its front-panel dual-color LED status indicator displays green for normal levels and red when clipping for fast metering. It has two XLR outputs in additional to two instrument-level 1/4" outputs. The BLX88 can be used with up to 11 other compatible systems simultaneously per frequency band.
Shure BLX188/CVL Dual-Channel Dual Lavalier Wireless Mic System
SPECS
-
CVL Centraverse Lavalier Condenser Microphone
Type Electret condenser Frequency Response 50 Hz to 20 kHz Polar Pattern Cardioid Output Impedance 600 Ω @ 1 kHz, typical Audio Output Level -43.5 dBV/Pa Signal to Noise Ratio 72 dB @ 1 kHz Maximum SPL 139 dB, @ 1 kHz (1,000 Ω load) Dynamic Range 117 dB, @ 1 kHz (1,000 Ω load) Output Noise 22 dB, typical, A-weighted Power Requirements +5 V DC (nominal), 10 V maximum (DC bias) Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 Cable 50" (1.3 m) Connector TA4F Weight 0.88 oz (25 g) Packaging Info Box Dimensions (LxWxH) 7.7 x 5.0 x 3.1" -
BLX1 Bodypack Transmitter (J10: 584 - 608 MHz)
Audio Input Gain: -16 dBV (Maximum), 10 dBV (Minimum) Gain Adjustment Range 26 dB Input Impedance 1 MOhm RF Output 10 mW, Typical Housing Molded ABS Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline Battery Life Up to 14 Hours Dimensions (H x W x D) 4.3 x 2.5 x 0.8" (110 x 64 x 21 mm) Weight 2.6 oz (75 g) Packaging Info Box Dimensions (LxWxH) 11.1 x 5.1 x 3.1" -
BLX88 Dual-Channel Wireless Receiver (J10: 584 - 608 MHz)
Output 2x XLR Output
2x 1/4" (6.35 mm) OutputOutput Impedance XLR: 200 ohms
1/4": 50 ohmsAudio Output Level XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)RF Sensitivity -105 dBm for 12 dB SINAD, Typical Image Rejection >50 dB, Typical Housing Molded ABS Power Requirement 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive) Dimensions (H x W x D) 1.5 x 15 x 4.5" (40 x 388 x 116 mm) Weight 15.1 oz (429 g) Packaging Info Box Dimensions (LxWxH) 19.4 x 16.5 x 3.1"
-