The Miller DS-10 DV Fluid Head and Solo Aluminum Tripod with Pan Handle and Bag is a complete tripod system that supports up to 11 pounds of cameras and accessories. The fluid head features a 75mm half ball for quick leveling, two counterbalance settings, fluid pan and tilt drag, and a sliding camera balance plate. The head tilts from straight down to 75° tilting upwards, and 360° continuous panning with individual pan and tilt locks. An included articulating pan handle allows you to adjust your grip for the most effective operation.

The Solo 75 legs are made from magnesium alloy, providing a beneficial balance between strength, durability, and weight. It features a 75mm bowl for leveling, and integrated twist-locks for height adjustment. Combined with the three preset locking positions, the legs feature a height range adjustment of 9 to 64" (not including the height of the head). The included soft-sided carry case features padded carrying handles and allows you to store your head, handle, and legs for storage or transport.
DS-10 Fluid Head (75mm Ball Base)
The Miller DS-10 fluid head delivers the level of quality only found in more expensive (high-priced) heads, for today's compact digital camcorder shooters. Features a multi-step fluid drag system, an integrated counterbalance system combined with a sliding balance plate and a quick release and automatic locking system.


Multi-Step Pan & Tilt Fluid Drag System
The DS-10 fluid head incorporates Miller's multi-step Fluid Drag system ensuring smooth, consistent fluid drag control across all temperature ranges and through a wide range of light and heavy settings.
Preset Counterbalancing
The DS-10 uses a special designed counterbalanced system, to neutralize the effect of payloads and their centers of gravity.
Quick Release Camera Platform
This device is fitted with a precision, quick release camera platform that incorporates a sliding balance plate for fine tune payload balancing.
Safe at Any Temperature
Pressure or temperature does not influence the damping system, it has an operating range from -40°F to +149°F, and works without friction.
Solo DV Aluminum Tripod w/75mm bowl
The Miller Solo DV aluminum tripod is a unbraced ultra-light support meant for rapid setup and breakdown while supporting a substantial load of 44 lb (20 kg). The industry standard 75mm bowl will accommodate many fluid heads, and the spiked legs wind-down rubber pads assure the best footing no matter the terrain.


Ultra rigid aluminum alloy and magnesium design
3-position Leg Angle locking - no spreader
Spike or wind-down rubber feet
681 Pan Bar Handle for Select Video Heads
This Miller Pan Bar Handle is compatible with the Miller DS5, DS10, DS20, and Miller Compass 23 fluid video heads. It connects and locks into either side of those heads with a clamp and bolt for right- or left-handed use. A rubberized handle provides a comfortable means to move its aluminum-alloy shaft, which measures 15.4".

This angled pan bar handle can rotate within its clamp, allowing a downward-pointing orientation for right or left-handed use.


1518 Soft Tripod Case
The Miller 1518 Soft Tripod Case is a padded tripod carry case designed for the Miller DV Solo tripods. It has a Water-resistant nylon fabric with zippers on the bag and the outside pocket. The case is carried by interlocking carry handle straps.


Soft padded tripod case
1 large outside pocket
ID window
Compatible with;
Miller DV Solo Tripods

Miller DS-10 DV Fluid Head and Solo Aluminum Tripod

SKU: 1640
$1,169.00Price
  • Specs

    DS-10 Fluid Head (75mm Ball Base)
    Camera Plate
    Camera Plate Features    Sliding Balance Plate, Quick Release
    Camera Mounting Screw    1 x 1/4"-20 Male
    1 x 3/8"-16 Male
    Tripod Platform
    Base Mount    75 mm Half Ball
    Pan & Tilt
    Drag Control    Continuous
    Vertical Tilt    +90° to -75°
    Panning Range    360°
    Independent Pan Lock    Yes
    Independent Tilt Lock    Yes
    Physical
    Load Capacity    11 lb / 5 kg
    Counter Balance    Incremental 2-Step (10 lb / )
    Bubble Level    1
    Operating Temperature    -40 to 149°F / -40 to 65°C
    Weight    3.4 lb / 1.5 kg
    Packaging Info
    Box Dimensions (LxWxH)    18.0 x 7.0 x 5.0"
    Solo DV Aluminum Tripod w/75mm bowl
    General
    Head Mount Type    75 mm Bowl
    Load Capacity    44 lb / 20 kg
    Maximum Working Height    63.5" / 161.4 cm
    Minimum Working Height    9.2" / 234 mm
    Folded Length    27.6" / 700 mm
    Materials    Aluminum
    Weight    6.6 lb / 3 kg
    Legs
    Leg Lock Type    Twist Lock
    Independent Leg Spread    Yes
    Leg Sections    3
    Feet Features    Retractable, Spiked
    Packaging Info
    Box Dimensions (LxWxH)    37.5 x 12.7 x 10.5"
    681 Pan Bar Handle for Select Video Heads
    Compatibility    Miller DS5 Video Head
    Miller DS10 Video Head
    Miller DS20 Video Head
    Miller Compass 23 Video Head
    Material    Aluminum alloy with rubberized handle
    Length    15.4" (39.1 cm)
    Weight    0.6 lb (0.3 kg)
    Packaging Info
    Box Dimensions (LxWxH)    18.2 x 6.6 x 6.4"
    1518 Soft Tripod Case
    Carrying/Transport Options    Connecting Handles
    Type of Closure    Zipper
    Exterior Material    Nylon
    Padded    Yes
    Interior Dimensions    H: 7.0 x W: 7.5 x L: 34.0" / H: 17.8 x W: 19.1 x L: 86.4 cm
    Weight    1.6 lb / 0.7 kg
    Packaging Info
    Box Dimensions (LxWxH)    37.0 x 12.5 x 10.5"

2018-2020 AV Associates of Nebraska Small Town, Big Delivery!!

  • w-facebook