The RS-250D Tripod System from Libec includes the RT30B tripod with a 75mm bowl, the RH25D head, the SP-2B ground spreader, and the RC-30 case. The RT30B 2-stage aluminum tripod can extend from 16 to 59.5". It is designed to work with the RH25D head. The SP-2B ground spreader works on level surfaces, providing both stability and floor protection. The RC-50 black tripod case is a padded case with rubber feet, designed to carry your tripod.
RH25D Fluid Head
Designed for compact cameras weighing up to 13 lb, the RH25D Fluid Head from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the RH25D from a tripod with a bowl mount to a flat-mount slider.
To achieve proper balance, the head includes a sliding camera plate with 1.6" of fore/aft adjustment. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide a smooth action with reduced backlash and unnecessary "bouncing."Included with the head is a PH-6B pan handle. The handle is extendable for better reach or more precise movement. The bar can be placed on the right or left side of the head by screwing it onto one of the rosettes.
Continuous Counterbalance
This fluid head is equipped with an continuously adjustable counterbalance system that can be fine-tuned to provide the correct amount of counterforce that corresponds to the weight and angle of your camera. Different cameras can be used and correct counterbalance can be set for each camera configuration.
Fluid Drag System
The fluid drag mechanism reduces backlash that can occur at the beginning or end of panning/tilting moves.
Low Temperature Performance
The RH25D is rated to be used in temperatures down to -40°F without seriously impacting the performance of the fluid drag system.
RT30B 2-Stage Aluminum Tripod Legs
The Libec RT30B 2-Stage Aluminum Tripod Legs feature a 75mm bowl base and support up to 55 lb loads. The height range is a low minimum height of 16" to a maximum height of 59.5". The tripod has spiked feet for use on soft ground, and the aluminum die-cast material used for the upper leg casing enhances overall stability.
SP-2B Ground Spreader
The Libec SP-2B Ground Spreader is a ground-level tripod spreader that replaces the SP-1B. More user-friendly and durable than its predecessor, the SP-2B is designed for use with the RT30B and RT40B tripod legs. It works on level surfaces, providing both stability and floor protection.
Carrying Case
The Libec RC-30 Carrying Case (Black) is a non-padded, vinyl case designed to carry a Libec RT-30 tripod with an RH-30 tripod head attached. It is carried by a handle or an attached, adjustable shoulder strap.
Construction
Non-padded vinyl
Zipper closure
Carrying options
Carry handle
Attached, adjustable shoulder strap
Compatible with Libec RT-30 tripod with an RH-30 tripod head
Libec RS-250D Tripod System with Floor Spreader
Specs
RH25D Fluid Head
Camera Plate
Camera Plate Features Sliding Balance Plate
Balance Plate Sliding Range 3.2" / 80 mm
Tripod Platform
Base Mount 75 mm Half Ball
3/8"-16 Thread
Pan & Tilt
Drag Control Tilt: 2-Step
Vertical Tilt +90° to -70°
Physical
Load Capacity 13 lb / 6 kg
Counter Balance Continuous (4 to 11 lb / 1.8 to 5 kg)
Base Diameter 2.95" / 75 mm
Operating Temperature -40 to 140°F / -40 to 60°C
Weight 5.5 lb / 2.5 kg
Packaging Info
Box Dimensions (LxWxH) 19.213 x 11.575 x 8.819"
RT30B 2-Stage Aluminum Tripod Legs
General
Head Mount Type 75 mm Bowl
Load Capacity 55 lb / 25 kg
Maximum Working Height 59.5" / 150.5 cm
Minimum Working Height 16" / 40.6 cm
Materials Aluminum
Weight 5.7 lb / 2.6 kg
Legs
Leg Lock Type Rotating Locking Lever
Independent Leg Spread Yes
Leg Sections 3
Feet Features Spiked
Center Column
Packaging Info
Box Dimensions (LxWxH) 32.0 x 9.0 x 9.0"
SP-2B Ground Spreader
Packaging Info
Box Dimensions (LxWxH) 20.05 x 7.3 x 6.4"
Carrying Case
Carrying/Transport Options Connecting Handles, Shoulder Strap
Type of Closure Zipper
Exterior Material Vinyl, Nylon
Padded No
Packaging Info
Box Dimensions (LxWxH) 21.1 x 15.2 x 2.5"