Enjoy immersive multi-channel sound with the Denon AVR-X4500H 9.2-Channel Network A/V Receiver. It delivers up to 125W of power per channel at 8 Ohms and features Dolby Atmos, DTS:X, and Auro-3D compatibility for object-based audio support. Built-in Bluetooth and AirPlay 2 support allow the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets. HDR pass-through is also supported for HDR10, Dolby Vision, and HLG technologies.
Onboard Wi-Fi and Ethernet connectivity allow the AVR-X4500H to access a variety of Internet-based music sources, like Pandora, SiriusXM, Internet radio, and more. As an added convenience, you can download the free Denon AVR Remote App to control the receiver from your compatible Android, iOS, or Kindle devices.
With eight HDMI inputs and three HDMI outputs, this receiver can act as a video switcher for your HD source components. It will pass through 3D and 4K signals, and upscale non-UHD signals to near-4K quality for enhanced viewing of lower-resolution sources when paired with a 4K display. The receiver also has a USB port for accessing media stored on USB flash drives. Audyssey sound optimization will help you calibrate the receiver to your speakers and room setup for a tailored listening experience.
Note: Access to certain Internet-based content may require a subscription to a service. Not all services are available in all areas.
Discrete Amplification with Eco Mode
Featuring discrete power output devices on all channels, the AVR-X4500H delivers up to 125W per channel at 8 Ohms. The Auto Eco mode is designed to adjust the maximum power available according to the volume level, as well as an on-screen Eco meter that lets you see the power consumption reduction in real time.
4K Ultra HD, HDR10, HLG, Dolby Vision, and HDCP 2.2 Support
Featuring eight HDMI ports, including one located on the front panel, plus three HDMI outputs – all of which are HDCP 2.2-compliant – the AVR-X4500H is compatible with copy-protected 4K Ultra HD 60 Hz content, 4:4:4 Pure Color sub-sampling, BT.2020, 21:9 video, 3D, HDR10, HLG, Dolby Vision, and eARC (via future firmware update). Certified by the Imaging Science Foundation, the AVR-X4500H features a suite of video calibration tools for use by an ISF technician, along with ISF Day and ISF Night video modes.
Built-In Bluetooth, Wi-Fi, and AirPlay 2 Capability
Denon AVR-X4500H 9.2-Channel Network A/V Receiver
Denon AVRX4500H Specs
Main Unit Output Power 125 W per channel @ 8 Ohms, 20 Hz to 20 kHz, 0.05% THD, 2 channels driven
165 W per channel @ 6 Ohms, 1 kHz, 0.7% THD, 2 channels driven
235 W per channel @ 6 Ohms, 1 kHz, 10% THD, 1 channel driven
Output Impedance 4 to 16 Ohms Channels 9.2 Tuner AM / FM Input Sensitivity Preamplifier: 200 mV Frequency Response Preamplifier: 10 Hz to 100 kHz (+1, -3 dB) (Direct mode) Signal to Noise Ratio Preamplifier: 102 dB (IHF-A weighted, Direct mode) Surround Modes DTS Neural:X, DTS Virtual:X Object-Based Audio Support Dolby Atmos, DTS:X, Auro-3D Video Upscaling Yes, to near-4K Pass-Through 4K/60 Hz, 4:4:4 color resolution, HDR10, Dolby Vision, HLG, BT.2020, 21:9, 3D, CEC Tuner Section FM Frequency Range 87.5 to 107.9 MHz AM Frequency Range 520 to 1710 kHz Connectivity Bluetooth Yes Wi-Fi Yes, dual-band (2.4/5 GHz) AirPlay Yes, AirPlay 2 Inputs 8 x HDMI (1 front)
2 x optical TOSLINK
2 x digital coaxial
2 x component video
3 x composite video
6 x stereo RCA audio (1 phono with ground screw)
1 x USB (front)
Outputs 3 x HDMI (1 ARC-compatible, 1 Zone 2)
1 x component video
2 x composite video (1 Zone 2)
1 x 2-channel RCA Zone 2 stereo pre-out
1 x 2-channel RCA Zone 3 stereo pre-out
1 x 11.2-channel RCA pre-out
1 x 1/4" / 6.35 mm headphone (front)
Other Ports 1 x setup microphone input (front)
1 x Denon Link HD
1 x FM tuner antenna
1 x AM tuner antenna
2 x Bluetooth / Wi-Fi antenna
1 x Ethernet
1 x 1/8" / 3.5 mm IR remote in
1 x 1/8" / 3.5 mm IR remote out
1 x RS-232C
2 x 1/8" / 3.5 mm trigger out (12 VDC, 150 mA max)
1 x AC power cord
Speaker Connectors 11 x binding post pairs HDMI CEC Yes Audio Return Channel (ARC) Yes, on main HDMI output HDMI Version Not specified by manufacturer HDCP Compliance HDCP 2.2 on all ports General Front Panel Aluminum with trap-door On-Screen Display Yes, GUI Power Requirements 120 VAC, 60 Hz Power Consumption Operational: 710 W
Operational, No Sound, ECO On: 65 W
Operational, No Sound, ECO Off: 110 W
Standby: 0.1 W
CEC Standby: 0.5 W
Dimensions (W x H x D) 17.1 x 6.6 x 15.3" / 43.4 x 16.7. x 38.9 cm Weight 30.2 lb / 13.7 kg Packaging Info Package Weight 36.1 lb Box Dimensions (LxWxH) 21.2 x 19.4 x 10.4"