The PRO-XD from Azden is a 2.4 GHz digital wireless lavalier system that has over a 100' range with automatic frequency scan and sync capabilities. It can be used to capture audio in several environments for applications such as camcorders, DSLR, mobile devices, recorders, and more.

The PRO-XD system features a PRO-XDT bodypack transmitter, a PRO-XDR camera-mount receiver, and an EX-503XD lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a line level jack and a mixed input jack to allow for several source options.

The PRO-XD's transmitter and receiver are powered by internal lithium-ion batteries, and each can operate for over 10 hours when fully charged. In addition, up to four systems can be used simultaneously with no interference.

Finally, set up is a breeze with automatic syncing between receiver and transmitter. The EX-503XD lavalier microphone features an omnidirectional polar pattern with a frequency response of 30 Hz to 20 kHz. The PRO-XD system also includes an 1/8" mini-output cable, a USB cable, a lapel clip, a shoe mount, and a battery charger.

Operates in 2.4 GHz wireless range, which is completely free of TV and radio interference

48 kHz/16-bit digital audio quality

Mobile device compatible

Rechargeable internal batteries will run for approximately 10 hours

Wide frequency response and low internal noise

Headphone monitor output

Line in aux input

Azden PRO-XD 2.4 GHz Digital Wireless Lavalier System

  • Specs

    Azden Pro-XD Specs
    Operating Frequency    2.4 GHz ISM band
    Dynamic Range    90 dB
    Signal to Noise    80 dB
    Operating Range    115' / 35 m typical; up to 394' / 120 m in ideal conditions
    Frequency Response    20 Hz - 20 kHz, ± 1 dB
    Digital Sampling    16-bit/48 kHz
    System Latency    14 ms
    Battery Life    300 cycles
    Battery Type    Lithium-ion
    Power Supply    USB 5 V
    RF Output Power    10 mW
    Maximum Output Level    -14 dBV
    Mic Output    1/8" / 3.5 mm dual-mono/stereo
    Headphone Output    1/8" / 3.5 mm stereo
    Output Impedance    Mic: 600 ohms
    Headphone: 16 ohms
    Battery Life    16 hours
    Battery Charge Time    3 hours
    Dimensions (W x H x D)    1.9 x 3.1 x 0.6" / 48 x 79 x 14 mm
    Weight    2.4 oz / 68 g
    RF Output Power    10 mW
    Mic Input    3.5 mm mono TRRS
    Aux Input    1/8" / 3.5 mm stereo, line level
    Input Impedance    Mic: 2.2 kOhms
    Aux: 10 kOhms
    Maximum Input    300 mV RMS
    Battery Life    11 hours
    Dimensions (W x H x D)    1.9 x 3.1 x 0.6" / 48 x 79 x 14 mm
    Weight    2.2 oz / 62 g
    Microphone Element    Electret condenser
    Polar Pattern    Omnidirectional
    Frequency Response    30 Hz to 20 kHz
    Sensitivity    -46 dB at 1 kHz (0 dB=1 V/Pa)
    Impedance    2.2 kOhms (at 1 kHz)
    Power Requirement    Plug-in power 1-10 VDC
    Connector Type    1/8" / 3.5 mm TRRS
    Cord Length    41" / 105 cm
    Packaging Info
    Package Weight    0.8 lb
    Box Dimensions (LxWxH)    9.6 x 4.3 x 1.9"