The Audix AP61 SAX is a Performance Series single-channel true diversity receiver and transmitter bundle designed to deliver reliable long-range wireless audio for performers, presenters, and audio engineers in clubs, houses of worship, and live stage applications. It includes an R61 single-channel true diversity receiver, one B60 bodypack transmitter, and an ADX20i cardioid condenser clip-on instrument microphone. With conveniences such as one-touch sync and auto scan, a high-contrast LCD, and 207 pre-coordinated frequencies, the bundle is easy to configure and efficient to operate. It ships with two antennas, two BNC antenna cables, an audio cable, two AA batteries, a power supply, and a rackmount kit.

Audix AP61 SAX R61 Single-Channel True Diversity Receiver with Bodypack Transmit

  • Specs

    Audix R61 Kit Single-Channel Wireless True Diversity Receiver (522 To 586 MHz)

    Frequency Band 522 to 586 MHz
    Bandwidth 64 MHz
    # Of Simultaneous Systems Up to 24
    Switchable Frequencies 207 pre-coordinated frequencies
    Reception Frequencies 2560 tunable frequencies (spaced 25 kHz apart)
    Wireless Range Up to 450' / 137 m
    Antenna Connector 2 x BNC (8 VDC, 150 mA)
    Outputs 1 x XLR 3-pin balanced
    1 x 1/4" TS unbalanced
    Audio Output Level XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain
    1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain
    Audio Level Control -12 to +9 dB in 3-dB steps
    Frequency Response 45 Hz to 18 kHz
    Compander 2:1
    Pilot Tone 32 kHz
    Receiving System Dual tuner, true diversity
    Signal to Noise Ratio 112 dB at 30 kHz deviation (A-weighted)
    Total Harmonic Distortion (THD) <0.4% (33 kHz deviation at 1 kHz)
    Sensitivity 5 dBµV (S/N 60 dB at 25 kHz deviation, A-weighted)
    Power Requirement 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A
    Enclosure Material Metal
    Dimensions (W x D x H) 8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm
    Weight 2.4 lb / 1.1 kg

    Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)

    RF Power Output 10/30 mW
    Bandwidth 64 MHz
    Gain Adjustment 0 dB, -6 dB, -12 dB, -24 dB
    Inputs 1 x mini-XLR 3-pin
    Input Impedance Mic: 10 kOhms
    Line: 1 MOhm
    Maximum SPL Approximately 128 to 140 dB (depending on microphone)
    Battery Life Approximately 14 hours
    Current Consumption 110 mA typical
    Power Requirement 2 x AA 1.5 V batteries
    Dimensions (W x L x D) 2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm
    Weight 3 oz / 85 g without batteries

    Packaging Info

    Package Weight 0.66 lb
    Box Dimensions (LxWxH) 11.45 x 4.75 x 2.8"

    Audix ADX20I Cardioid Condenser Instrument Microphone

    Transducer Condenser
    Polar Pattern Cardioid
    Frequency Response 40Hz to 20kHz
    Dynamic Range (Typical) not specified by manufacturer
    Signal-to-Noise Ratio 65dB
    Maximum Input Sound Level 130dB
    Power Requirements 9 - 52V Phantom Power
    Output Impedance 250 Ohms
    Output Connectors mini XLR male (Standard XLR on APS-911)
    Pad On APS-911 only
    Low Frequency Roll-Off On APS-911 only
    Dimensions 1.14 x .47" (29 x 12mm) (Length x Diameter)
    Weight 1.7 oz (4.7 g)

    Packaging Info

    Package Weight 0.45 lb
    Box Dimensions (LxWxH) 8.9 x 4.3 x 2.4"